Start practice — 8 questions →
Sample questions
If skin contact with the product occurs, how long should you rinse the area with water?
- 5 to 10 minutes
- Immediately and only once
- 15 to 20 minutes
- 30 to 60 minutes
Show answer
The label instructs to rinse immediately with plenty of water for 15 to 20 minutes if skin contact occurs.🔗 Source
What instruction is provided regarding watering after treatment if the soil is not moist?
- Do not water for 24 hours
- Water with 0.5 inches of water immediately after treatment
- Apply heavy irrigation to prevent runoff
- Wait for the next rain event to water
Show answer
The label states the product should be watered in with 0.5 inches of water immediately after treatment if soil is not moist.🔗 Source
What is the required application rate for controlling Ants in lawns and landscaped areas?
- 0.15 fl oz/1000 ft²
- 0.50 fl oz/1000 ft²
- 1.00 fl oz/1000 ft²
- 0.15 fl oz/500 ft²
Show answer
The label specifies a rate of 0.15 fl oz/1000 ft² for Ants.🔗 Source
Which of the following is a restriction regarding the size of the treatment area?
- Do not apply to areas larger than 5 acres
- Do not apply to lawns or turf areas less than 1000 sq. ft.
- Do not apply to areas smaller than 5000 sq. ft.
- Do not apply to areas with more than 10 trees
Show answer
The restrictions state: 'Do not apply to lawns or turf areas less than 1000 sq. ft.'🔗 Source
What Personal Protective Equipment (PPE) is required when handling this product?
- Long-sleeved shirts, long pants, socks, shoes, and gloves
- Chemical resistant apron and face shield
- N95 respirator and safety goggles
- Short sleeves and waterproof boots
Show answer
The PPE section requires wearing long-sleeved shirts, long pants, socks, shoes, and gloves.🔗 Source
Which of the following is a listed target pest for Triple Crown T&O Insecticide when applied to lawns and landscaped areas?
- Termites
- Japanese Beetles
- Cockroaches
- Bed bugs
Show answer
Japanese Beetles are explicitly listed as a target pest in the application rates section.🔗 Source
To protect bees, when should you avoid applying this product?
- During the early morning
- When plants are in bloom
- When the wind is blowing
- During the heat of the day
Show answer
The label states to avoid applying when plants are in bloom to protect bees.🔗 Source
According to the restrictions, which of the following is a prohibited application site?
- Athletic fields
- Parks
- Irrigation systems
- Residential lawns
Show answer
The restrictions explicitly state: 'Do not apply to any type of irrigation system.'🔗 Source
← All practice exams