Start practice — 8 questions →
Sample questions
What is the required dilution for a general surface application to achieve quicker knockdown and/or longer residual control during a severe infestation?
- 16 milliliters per 1000 sq. ft.
- 8 milliliters per 1000 sq. ft.
- 0.025% dilution
- 0.05% dilution
Show answer
For general surface application with a severe infestation, the rate is 16 milliliters per 1000 sq. ft.To control carpenter ants and termites in the soil beneath firewood, what is the required application rate?
- 1 gallon per 8 square feet
- 1 gallon per 1000 square feet
- 8 milliliters per gallon
- 0.05% dilution per square foot
Show answer
For outdoor soil beneath firewood, the rate is specified as 1 gallon per 8 square feet.When treating for carpenter ants in houses and other structures, what is the maximum allowable rate of dilution?
- 1 gallon per 1000 square feet of treated surface
- 1 gallon per 500 square feet of treated surface
- 8 milliliters per 1000 square feet
- 16 milliliters per 1000 square feet
Show answer
The label states: 'Do not exceed 1 gallon of dilution per 1000 square feet of treated surface.'When treating carpenter bee gallery entrance holes, how long may the holes be left open to ensure returning adult bees are killed?
- 24 hours
- 8 to 12 hours
- 48 hours
- 1 hour
Show answer
The label states that following treatment, entrance holes may be left open 24 hours to be certain that returning adult bees are killed.For foam applications, what is the required amount of Tempo SC Ultra formulation to be used per gallon of pre-foamed dilution?
- 8 to 16 milliliters
- 0.05 to 0.1 milliliters
- 1 gallon
- 8 to 16 ounces
Show answer
The mixing instructions for foam application state to foam 8 to 16 milliliters of Tempo SC Ultra formulation per gallon of pre-foamed dilution.Which of the following is a permitted indoor application site for controlling exposed workers and winged reproductive forms of termites?
- Attics, crawl spaces, unfinished basements, or man-made voids
- Inside trees and utility poles
- Soil beneath firewood
- Driveways and hard surfaces
Show answer
The label specifies attics, crawl spaces, unfinished basements, or man-made voids as indoor sites for this termite treatment.When applying Tempo SC Ultra for spot, crack and crevice, or foam applications for a severe infestation, how much product should be mixed in one gallon of water?
- 16 milliliters
- 8 milliliters
- 0.05 milliliters
- 16 gallons
Show answer
For severe infestations using spot, crack and crevice, or foam applications, the label requires 16 milliliters mixed in one gallon of water.When injecting above ground termites inside trees or utility poles, what tool requirement is specified?
- An appropriate treatment tool with a splashback guard
- A pointed injection tool only
- A coarse fan spray nozzle
- A manual drenching bucket
Show answer
The label instructs to use an appropriate treatment tool with a splashback guard when injecting into infested cavities.← All practice exams