Start practice — 8 questions →
Sample questions
When performing a surface spray application for smaller areas, how should the product be prepared?
- Mix with cold water only
- Dissolve the required amount in a spray tank
- Dilute 1/2 gallon per acre in a spray tank
- Mix with 50 mg/L of alkalinity
Show answer
For smaller applications, surface spray application can be used by dissolving the required amount in a spray tank.🔗 Source
According to the label, what is the concentration of the active ingredient Copper Sulfate Pentahydrate in SePRO Total Pond - Clear G?
- 58.9%
- 5.89%
- 67.69%
- 58.9 mg/L
Show answer
The active ingredient is Copper Sulfate Pentahydrate at a concentration of 58.9%.🔗 Source
What is the maximum allowable area of the water's surface that can be treated during a single application?
- 1/2 of the total surface area
- 1/4 of the total surface area
- 1/3 of the total surface area
- The entire surface area
Show answer
Do not apply more than 1/3 of the water's total surface area during any one application.🔗 Source
To which of the following types of water features is this product designed for use?
- Ponds, lakes, and reservoirs
- Irrigation and drainage canals
- Man-made outdoor water features like fountains or ornamental ponds
- All of the above
Show answer
designed for use in ponds, lakes, reservoirs, irrigation and drainage canals, and man-made outdoor water features such as water gardens, ornamental ponds, and fountains.🔗 Source
When applying the product in seasonal conditions, what must the applicator ensure regarding ice?
- Application must occur only after ice has melted
- Application should occur before ice forms
- Application should occur in freezing temperatures
- Application should only occur during heavy ice cover
Show answer
the product is effective year-round, but application should occur before ice forms.🔗 Source
Which of the following is a function of SePRO Total Pond - Clear G beyond algae control?
- Increasing dissolved organic carbon levels
- Increasing alkalinity levels
- Improving water clarity by reducing phosphorus levels
- Increasing the pH of the water
Show answer
Beyond algae control, it is formulated to improve water clarity by reducing phosphorus levels and binding/precipitating suspended solids.🔗 Source
According to the PPE requirements, what should an applicator do if contact with the product occurs?
- Wash with soap and warm water and call a doctor immediately
- Rinse skin or eyes with plenty of water and seek medical attention if necessary
- Remove contaminated clothing and do not wash skin
- Rinse with low pH solution and seek medical attention
Show answer
If contact occurs, rinse skin or eyes with plenty of water and seek medical attention if necessary.🔗 Source
Which of the following is a restriction regarding the water chemistry for using SePRO Total Pond - Clear G?
- Do not use in waters with high dissolved organic carbon (DOC) levels (≥3.0 mg/L)
- Do not use in waters with alkalinity greater than 50 mg/L
- Do not use in waters containing low pH (≤5.0)
- Do not use in waters with high alkalinity
Show answer
Do not use in waters containing low pH (≤5.0), low dissolved organic carbon (DOC) levels (≤3.0 mg/L), or 'soft' waters (alkalinity less than 50 mg/L).🔗 Source
← All practice exams