Start practice — 8 questions →
Sample questions
What is the required dosage for microbiological control in influent water systems per 1,000 gallons of process water?
- 0.1-1.82 fl. oz.
- 0.8-1.28 lb. (dry basis)
- 1.4-5.0 fl. oz.
- 22.8-16.2 fl. oz.
Show answer
The mixing instructions for influent water systems specify a dosage of 0.1-1.82 fl. oz. per 1,000 gallons.What must be done before discharging effluent containing this product into sewers?
- Dilute it with 1,000 gallons of fresh water
- Apply a shock dose first
- Notify the local sewage plant authority
- Wait 24 hours for the product to dissipate
Show answer
The restrictions state: 'Do not discharge effluent containing this product into sewers without previous notifying the local sewage plant authority'.For continuous dosing to maintain microbiological control in water systems, what is the specified rate per 1,000 gallons?
- 0.1-1.82 fl. oz.
- 0.8-1.28 lb. (dry basis)
- 1.4-5.0 fl. oz.
- 5.0-10.0 fl. oz.
Show answer
The mixing instructions for continuous dosing specify a rate of 1.4-5.0 fl. oz. per 1,000 gallons.Which of these is a specific restriction regarding the use of SaniDate 16.0 WWT?
- Do not use in cooling towers
- Do not use in paperboard manufacturing
- Do not use in kidney dialysis equipment
- Do not use in recirculating water systems
Show answer
The restrictions section explicitly states: 'Do not use in kidney dialysis equipment'.Which of the following organisms is NOT listed as a target pest for SaniDate 16.0 WWT?
Show answer
The label states the product controls bacteria, fungi, clams, oysters, and other aquatic invertebrates, but does not mention rodents.When handling SaniDate 16.0 WWT, which set of PPE is required according to the label?
- Short sleeves, shorts, and leather gloves
- Long-sleeved shirt, long pants, rubber gloves, and eye protection
- Disposable apron, hairnet, and cotton gloves
- Full body suit and heavy winter boots
Show answer
The label requires long-sleeved shirts, long pants, rubber gloves, and eye protection due to the product being corrosive.According to the label, where is SaniDate 16.0 WWT approved for use?
- Only in indoor water systems
- Both indoor and outdoor locations
- Only in paper manufacturing plants
- Only in kidney dialysis equipment
Show answer
The applications section specifies the location as 'Both' (indoor and outdoor).SaniDate 16.0 WWT is prohibited from being used in which of the following capacities?
- Cooling tower maintenance
- Direct contact with food or drink
- Paper pulp manufacturing
- Evaporative condenser cleaning
Show answer
The label states the product is not for use in dietary applications or for direct contact with food/drink.← All practice exams