Start practice — 14 questions →
Sample questions (showing 8 of 14)
What is the application rate for Renovate3 when targeting aquatic plants in aquatic sites?
- 2 lb ae of triclopyr per acre
- 6 lb ae of triclopyr per acre
- 9 lb ae of triclopyr per acre
- 14 lb ae of triclopyr per acre
Show answer
The label states: '6 lb ae of triclopyr per acre (aquatic sites)'.🔗 Source
When applying Renovate3 to ditches or canals used for irrigation, what is the time restriction?
- Do not apply if irrigation occurs within 1 month
- Do not apply if irrigation occurs within 2 months
- Do not apply if irrigation occurs within 4 months following treatment
- Do not apply if irrigation occurs within 6 months following treatment
Show answer
Use restrictions: Do not apply on ditches or canals currently being used to transport irrigation water or that will be used for irrigation within 4 months following treatment.🔗 Source
What is a prohibited mixing practice for Renovate3?
- Do not apply with a miscible
- Do not dilute more than 1:10
- Do not use tap water for dilution
- Do not mix in metal containers
Show answer
Use restrictions: Do not apply with a miscible🔗 Source
In which of these locations is application of Renovate3 specifically prohibited?
- Marshes and wetlands
- Un-impounded rivers or streams
- Ponds, lakes, and reservoirs
- Non-irrigation canals
Show answer
Use restrictions: Do not use in un-impounded rivers or streams.🔗 Source
When applying Renovate3 to aquatic sites, what is a primary concern regarding the decomposing plant matter?
- Increased water acidity
- Oxygen depletion or fish suffocation
- Reduction in water clarity
Show answer
The label states: 'When applied to aquatic sites, it is important to manage application to avoid oxygen depletion or fish suffocation caused by decomposing plant matter.'🔗 Source
According to the label, for which of the following sites is Renovate3 NOT permitted for use?
- Ponds and lakes
- Marshes and wetlands
- Un-impounded rivers or streams
- Non-irrigation canals
Show answer
The label states: 'Do not apply to un-impounded rivers or streams.'🔗 Source
To minimize spray drift, what is the recommended wind speed for application?
- Below 5 mph
- Exactly 5 mph
- Between 5 and 10 mph
- Above 10 mph
Show answer
Timing and weather conditions: Apply when wind is low (below 5 mph) to minimize spray drift.🔗 Source
Which of the following is a required piece of Personal Protective Equipment (PPE) for handlers of Renovate3?
- Chemical resistant apron
- Face shield
- Chemical resistant gloves (>14 mils)
- Rubber boots
Show answer
PPE: Chemical resistant gloves (>14 mils) such as butyl rubber, natural rubber, neoprene rubber or nitrile rubber.🔗 Source
← All practice exams