Start practice — 8 questions →
Sample questions
If applying ReCon Bold SL to Alfalfa via soil-incorporated or soil-applied methods, what is the Restricted-Entry Interval (REI)?
- 0 hours
- 12 hours
- 24 hours
- 60 days
Show answer
The REI section states: REI: 0 hours for soil-incorporated or soil-applied applications.🔗 Source
What is the maximum single application rate of ReCon Bold SL for Avocados?
- 2.0 pt/A
- 3.6 pt/A
- 4.0 pt/A
- 6.0 lb ai/year
Show answer
Under Use restrictions: Maximum Single Application Rate: 4.0 pt/A (equivalent to 2.0 lb ai/A mefenoxam) for Avocados.🔗 Source
What is the required Personal Protective Equipment (PPE) regarding hand protection for this product?
- Nitrile rubber ≥ 15 mils
- Butyl rubber ≥ 14 mils, nitrile rubber ≥ 15 mils, neoprene rubber ≥ 14 mils, polyvinyl chloride (PVC) ≥ 14 mils, or Viton® ≥ 14 mils
- Chemical-resistant gloves made of barrier laminate or nitrile rubber ≥ 15 mils
- Any chemical-resistant gloves provided by the manufacturer
Show answer
The PPE section states: Wear... chemical-resistant gloves made of barrier laminate, butyl rubber ≥ 14 mils, nitrile rubber ≥ 15 mils, neoprene rubber ≥ 14 mils, or polyvinyl chloride (PVC) ≥ 14 mils, or Viton® ≥ 14 mils.🔗 Source
For an application of ReCon Bold SL to control Root Rot (Pythium spp.) in blueberries, which application method and rate is listed?
- 0.25 - 0.50 pt/A via broadcast spray at planting
- 1.0 - 2.0 pt/A or 3.6 pt/A per 1,000 rot ft via soil-directed and other foliar applications
- 0.5 - 1.0 pt/A via preplant incorporated or spray broadcast
- 3.6 pt/A via drip irrigation only
Show answer
In Application rates and targets: target_pest: Root Rot (Pythium spp.); site: Blueberries; rate: 1.0 - 2.0 pt/A (0.50 - 1.0 lb) or 3.6 pt/A (1.8 lb) per 1,000 rot ft; notes: Soil-directed and other foliar applications; spray broadcast, band or drip.🔗 Source
According to the label, what must the applicator avoid during application?
- High temperature inversion conditions
- Wind speeds that favor drift beyond the intended area
- Conditions where uniform coverage cannot be obtained
- All of the above
Show answer
The Timing and weather conditions section states: Do not spray when wind speeds favor drift beyond the area intended for treatment; Avoid application under conditions when uniform coverage cannot be obtained; Avoid application under conditions when spray drift may occur; Do not apply during high temperature inversion conditions.🔗 Source
Which of the following is a restriction for Alfalfa following the application of this product?
- Do not harvest crops for 60 days.
- Do not feed green corn or hay out for 60 days after following Alfalfa.
- Do not exceed 1.4 lb ai/year of total mefenoxam products.
- Do not apply during high temperature inversion conditions.
Show answer
Under Use restrictions: Do NOT feed green corn or hay out for 60 days after following Alfalfa.🔗 Source
When mixing ReCon Bold SL in a spray tank, what is the correct order of operations for adding water and product?
- Add the product first, then add all the water.
- Add 1/4 - 1/2 of the required water, add the product with the agitator running, then add the remaining water.
- Add 1/2 of the required water, add the product, then add the remaining water without agitation.
- Add the product to an empty tank, then add all the water with the agitator running.
Show answer
According to the Mixing and dilution section: Add 1/4 - 1/2 of the required amount of water to the spray or mixing tank; With the agitator running, add ReCon Bold SL to the tank; Continue agitation while adding the remainder of the water.🔗 Source
When targeting Damping Off (Pythium spp.) in Carrots using soil-directed or foliar applications, what is the permitted application rate?
- 0.25 - 0.50 pt/A
- 1.0 - 2.0 pt/A
- 0.5 - 1.0 pt/A
- 3.6 pt/A
Show answer
In Application rates and targets: target_pest: Damping Off, Cavity Spot, Root Dieback (Pythium spp.); site: Carrots; rate: 0.5 - 1.0 pt/A (0.25 - 0.5 lb); notes: Soil-directed and other foliar applications...🔗 Source
← All practice exams