Start practice — 8 questions →
Sample questions
Which PPE is required when handling or applying this product?
- Chemical-resistant gloves, eye protection, and long-sleeved clothing
- N95 respirator, safety goggles, and rubber boots
- Face shield, heavy-duty apron, and nitrile gloves
- Dust mask, earplugs, and chemical-resistant coveralls
Show answer
The label requires chemical-resistant gloves, eye protection, and long-sleeved clothing.🔗 Source
What is the dilution requirement for QNAP 2 COPPER NAPHTHENATE RTU?
- Ready To Use (RTU)
- Mix 1 part product with 10 parts water
- Dilute with petroleum distillates
- Mix with water until 2% metallic copper is achieved
Show answer
The product name and mixing facts indicate it is an RTU (Ready To Use) formulation.🔗 Source
Under which condition is it prohibited to use this product?
- In the construction of beehives
- On wood that is located below ground
- On end cuts of pressure-treated wood
- On exterior wood applications
Show answer
The label explicitly states: 'Do not use in the construction of beehives.'🔗 Source
Which of the following is a specific use restriction regarding food or agriculture?
- Non-pressure treated wood is not suitable for garden applications where fruit or vegetables will be grown
- Do not use on wood used for outdoor picnic tables
- Do not use on wood that is used for animal enclosures
- Do not use on wood that is used for fruit tree supports
Show answer
The label states that non-pressure treated wood is not suitable for garden applications where fruit or vegetables will be grown.🔗 Source
What is the required application rate for ground contact wood applications?
- 0.04 to 0.05 lbs copper metal/ft²
- 0.17 to 0.20 lbs copper metal/ft²
- 1.0 to 2.0 lbs copper metal/ft²
- 0.02 to 0.04 lbs copper metal/ft²
Show answer
For ground contact, the label states it should be applied at a retention of 0.04 to 0.05 lbs copper metal/ft².🔗 Source
According to the label, where is it prohibited to apply this product?
- Directly to water or areas where surface water is present or intended to be below the high water mark
- On any wood that is located above ground level
- On wood that is used for outdoor furniture
- On pressure-treated wood end cuts
Show answer
The label restricts application directly to water or areas where surface water is present or intended to be below the high water mark.🔗 Source
Which of the following pests is QNAP 2 COPPER NAPHTHENATE RTU specifically designed to protect wood against?
- Termites, wood-destroying beetles, and carpenter ants
- Spiders, scorpions, and cockroaches
- Fleas, ticks, and bed bugs
- Mosquitoes, flies, and wasps
Show answer
The label states the product is designed to protect wood against decay, termites, wood-destroying beetles, and carpenter ants.🔗 Source
When applying QNAP 2 COPPER NAPHTHENATE RTU to non-pressure treated wood, what method should be used?
- A brush or roller
- A high-pressure sprayer
- A drenching hose
- A fine mist aerosol
Show answer
The label instructions specify to use a brush or roller when applying to non-pressure treated wood.🔗 Source
← All practice exams