Start practice — 8 questions →
Sample questions
When applying PERMETHRIN 3.2 SFR for subterranean termite control, which of the following is an approved application site?
- Under eaves
- Inside aircraft cabins
- Classrooms
- Food contacting surfaces
Show answer
The label states that for termite control, it may be applied to foundations, under eaves, or in crawl spaces.🔗 Source
In which of the following locations is the application of PERMETHRIN 3.2 SFR strictly prohibited?
- Indoor spaces occupied by the elderly or infirm
- Ornamental trees around commercial buildings
- Interscapies
- Lawns
Show answer
The restrictions state: Do not apply to indoor spaces occupied by patients, the elderly, or the infirm.🔗 Source
According to the label, who is permitted to perform the treatment of preconstruction lumber and logs?
- Licensed PCOs
- Any trained technician
- Homeowners
- Landscapers
Show answer
The label specifies that treatment of preconstruction lumber and logs may only be performed by licensed PCOs.🔗 Source
Under what weather condition should you avoid applying PERMETHRIN 3.2 SFR?
- When rain is predicted for the next 24 hours
- When the temperature is above 90 degrees
- When there is high wind
- When it is cloudy
Show answer
The timing/weather section states: Do not apply when rain is predicted for the next 24 hours.🔗 Source
For ornamental use, how should PERMETHRIN 3.2 SFR be applied?
- As a surface spray
- Via crack-and-crevice injection
- Through termite nests
- As a soil drench only
Show answer
The label states that for ornamental use, it can be applied as a surface spray.🔗 Source
When using ULV cold foggers, what additional PPE is specifically required if overhead exposure occurs?
- Chemical-resistant headgear
- A respirator
- Safety goggles
- A face shield
Show answer
The PPE section states that for ULV cold foggers, chemical-resistant headgear is required if overhead exposure occurs.🔗 Source
Which of the following target pests is specifically listed for control with PERMETHRIN 3.2 SFR?
- Subterranean termites
- Cockroaches
- Ants
- Bed bugs
Show answer
The label states the product is used for the control of subterranean termites such as Coptotermes, Heterotermes, Reticulitermes, and Zootermopsis.🔗 Source
What is the required finished strength range when using PERMETHRIN 3.2 SFR for subterranean termites in soil or nests?
- 0.5% to 1.0%
- 1.0% to 2.0%
- 2.0% to 3.2%
- 0.1% to 0.5%
Show answer
The mixing instructions specify an amount of 0.5% to 1.0% finished strength for subterranean termites in soil/nests.🔗 Source
← All practice exams