Start practice — 16 questions →
Sample questions (showing 8 of 16)
When applying Oximycin P5 to control algae, what are the recommended environmental conditions?
- Late evening under cloudy conditions
- Early in the day under calm, sunny conditions when water temperatures are warm
- During windy periods to ensure aeration
- In heavy rain to aid in dilution
Show answer
Timing and weather conditions: Apply early in the day under calm, sunny conditions when water temperatures are warm.🔗 Source
According to the label, what are the active ingredients in Oximycin P5?
- Hydrogen Peroxide and Peroxyacetic Acid
- Hydrogen Peroxide and Sodium Percarbonate
- Peroxyacetic Acid and Sodium Hypochlorite
- Oxygen and Peroxyacetic Acid
Show answer
It contains 26.5% Hydrogen Peroxide and 4.9% Peroxyacetic Acid as active ingredients.🔗 Source
Which of the following sets of Personal Protective Equipment (PPE) is required when handling Oximycin P5?
- Chemical-resistant gloves, goggles or face shield, long-sleeved shirt, long pants, and chemical-resistant footwear
- N95 mask, chemical-resistant gloves, goggles, and rubber boots
- Chemical-resistant suit, gloves, goggles, and long pants
- Long-sleeved shirt, long pants, and chemical-resistant footwear only
Show answer
Technicians must wear protective eyewear (goggles or face shield), chemical-resistant gloves, long-sleeved shirts, long pants, and chemical-resistant footwear.🔗 Source
What is the Reentry Interval (REI) for Oximycin P5 when used with non-spraying methods in enclosed environments like greenhouses?
- 1 hour
- 4 hours
- 0 hours
- 12 hours
Show answer
REI: 1 hour for fogging/spraying in enclosed environments; 0 hours for non-spraying in enclosed environments.🔗 Source
Under what circumstances should the application rate be increased?
- When water temperatures are low
- When applying to ornamental pools only
- When existing algae density is high and when dealing with resistant algae types
- When applying in windy conditions
Show answer
Application rates and targets: notes: Apply at higher rates when existing algae density is high and when dealing with resistant algae types.🔗 Source
When should an applicator wait before adding other products to the water after using Oximycin P5?
- 24 hours
- 48 hours
- 72 hours
- 1 week
Show answer
Timing and weather conditions: Wait 48 hours before adding other products after application.🔗 Source
What is the instruction regarding effluent containing this product being discharged into sewers?
- Do not discharge effluent under any circumstances
- Only discharge during calm weather conditions
- Do not discharge effluent containing this product into sewers without notifying the local sewage treatment plant
- Effluent must be diluted with 10 gallons of water first
Show answer
Use restrictions: Do not discharge effluent containing this product into sewers without notifying the local sewage treatment plant.🔗 Source
According to the product description, how should Oximycin P5 be mixed for application in irrigation/chemical tanks?
- Mix only with water
- Mix with water and a surfactant
- Mix with water and a wetting agent
- Dilute with 1:1 ratio of water and acid
Show answer
Mix only with water.🔗 Source
← All practice exams