Start practice — 8 questions →
Sample questions
What is the maximum allowable amount of dry product to be used per 1000 ft2?
- 8 ounces
- 15 ounces
- 4 ounces
- 32 ounces
Show answer
The label notes state: 'Do not exceed 8 ounces of dry product per 1000 ft2.'🔗 Source
If a technician is performing a 'Spray On' application for 250 ft2, what is the correct finished strength?
- 16 oz (480 mls) water
- 6 oz (180 mls) water
- 3 oz (90 mls) water
- 24 oz (720 mls) water
Show answer
The mixing instructions for Spray On at 250 ft2 specify 2 oz of product with 16 oz of water.🔗 Source
In a food/feed handling establishment, where is the product permitted to be used?
- Only in non-food/non-feed areas
- Anywhere in the facility including food contact surfaces
- Only in serving areas during operation
- On food packaging to prevent infestation
Show answer
The label restrictions state that in food/feed handling establishments, use is allowed ONLY in non-food/non-feed areas.🔗 Source
In serving areas, what is the maximum allowed size for a single treated area application?
- 2 sq. ft.
- 8 sq. ft.
- 10 sq. ft.
- 15 sq. ft.
Show answer
The label specifies that in serving areas, applications may be no more than 2 sq. ft. per treated area.🔗 Source
When applying the product as a 'Paint On' treatment for 500 ft2, what is the correct mixing ratio?
- 4 oz (113 gms) product with 6 oz (180 mls) water
- 4 oz (113 gms) product with 32 oz (960 mls) water
- 2 oz (56 gms) product with 16 oz (480 mls) water
- 3 oz (85 gms) product with 5 oz (150 mls) water
Show answer
The mixing instructions for Paint On at 500 ft2 specify 4 oz of product with 6 oz of water.🔗 Source
To help keep house fly populations manageable, when should applications begin?
- At the beginning of the season
- Only when an infestation is heavy
- During the peak of summer
- After the first frost
Show answer
The timing/weather section states to 'Start applications at the beginning of the season to help keep house fly populations manageable.'🔗 Source
When applying the product in serving areas, what are the requirements regarding food and food contact surfaces?
- Exposed food and food contact surfaces must be covered or removed
- Food contact surfaces must be sprayed with a diluted mixture
- Applications must be made only when the facility is in full operation
- No restrictions apply to serving areas
Show answer
The label states that in serving areas, applications may be made provided exposed food and food contact surfaces have been covered or removed.🔗 Source
According to the label, which target pest is Musca Cide Fly Bait Spray 2026 03 22 designed to control?
- house fly
- cockroach
- mosquito
- stink bug
Show answer
The label facts specifically list the house fly as the target pest.🔗 Source
← All practice exams