Start practice — 8 questions →
Sample questions
According to the label, what are the active ingredients and their respective percentages in Miravis Prime?
- Pydiflumetofen (12.8%) and Fludioxonil (21.4%)
- Fludioxonil (12.8%) and Pydiflumetofen (21.4%)
- Pydiflumetofen (21.4%) and Fludioxonil (12.8%)
- Fludioxonil (21.4%) and Pydiflumetofen (12.8%)
Show answer
It contains two active ingredients: Pydiflumetofen (12.8%) and Fludioxonil (21.4%).🔗 Source
To manage resistance and prevent pathogen adaptation, which fungicide groups should be rotated with Miravis Prime?
- Group 1 and Group 5
- Group 7 and Group 12
- Group 10 and Group 15
- Group 3 and Group 9
Show answer
Users should be aware of resistance management strategies, such as rotating with different fungicide groups (Group 7 and Group 12) to prevent pathogen adaptation.🔗 Source
What is the Re-entry Interval (REI) for this product?
Show answer
REI: 12🔗 Source
If applying the product by air, what is the minimum distance that must be maintained from water bodies?
Show answer
Do not apply by air within 75 ft of water bodies.🔗 Source
Which of the following states are explicitly listed as locations where Miravis Prime should NOT be used?
- Hawaii, Massachusetts, or New York
- Hawaii and California
- Massachusetts and New York only
- Hawaii, Massachusetts, and California
Show answer
Do not use in the state of Hawaii. Do not use in Massachusetts or New York.🔗 Source
Which of the following is NOT a required piece of Personal Protective Equipment (PPE) listed for this product?
- Long-sleeved shirt and long pants
- Chemical-resistant gloves
- Protective eyewear
- Respirator
Show answer
PPE: Long-sleeved shirt and long pants, protective footwear, chemical-resistant gloves (barrier laminate, butyl rubber, nitrile rubber, or neoprene rubber), and protective eyewear (face or eye protection).🔗 Source
When using chemigation to apply Miravis Prime, which factors must be managed to ensure efficacy and minimize drift?
- Wind speed and temperature inversions
- Nozzle selection and droplet size management
- Air application and ground application
- Drip and micro-irrigation system types
Show answer
When using chemigation, specific instructions for nozzle selection and droplet size management must be followed to ensure efficacy and minimize drift.🔗 Source
Under which weather conditions is application of Miravis Prime prohibited?
- When wind speeds exceed 10 mph or during temperature inversions
- When wind speeds exceed 15 mph or during high humidity
- When wind speeds exceed 5 mph or during temperature inversions
- Only during temperature inversions
Show answer
Do not apply when wind speeds exceed 10 mph or during temperature inversions.🔗 Source
← All practice exams