Start practice — 8 questions →
Sample questions
According to the label, what are the two active ingredients present in Miravis Ace?
- Pydiflumetofen (13.7%) and Propiconazole (11.4%)
- Pydiflumetofen (11.4%) and Propiconazole (13.7%)
- Pydiflumetofen (13.7%) and Viton® (11.4%)
- Propiconazole (13.7%) and Pydiflumetofen (11.4%)
Show answer
The product description states: 'It contains two active ingredients: Pydiflumetofen (13.7%) and Propiconazole (11.4%).'🔗 Source
Which of the following is a required component of the Personal Protective Equipment (PPE) for handling Miravis Ace?
- Nitrile, butyl, neoprene, or Viton® chemical-resistant gloves
- Latex or vinyl gloves
- Safety glasses and a respirator
- Long-sleeved shirt and short pants
Show answer
The PPE section specifies: 'Chemical-resistant gloves (barrier laminate, butyl, nitrile, neoprene rubber, or Viton®)'.🔗 Source
What precaution must be taken regarding application near water bodies?
- Do not apply if the water is moving.
- Do not apply where runoff could impact aquatic organisms.
- Only apply if the water level is high.
- Do not apply during irrigation.
Show answer
The use restrictions state: 'Do not apply near water bodies where runoff could impact aquatic organisms.'🔗 Source
To manage spray drift during application, the user should monitor which environmental factor?
- Rainfall
- Wind conditions
- Temperature inversions
- Humidity
Show answer
The timing and weather conditions section states: 'Monitor wind conditions to manage spray drift.'🔗 Source
What is the Restricted-Entry Interval (REI) for Miravis Ace?
- 24 hours
- 48 hours
- 12 hours
- 6 hours
Show answer
The REI section states: 'Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 12 hours.'🔗 Source
Under which weather conditions should application be avoided to ensure effective product performance?
- When rainfall or irrigation is expected within 48 hours.
- When temperature inversions occur.
- During high wind speeds.
- Both A and B.
Show answer
The timing and weather conditions section states to 'Avoid application when rainfall or irrigation is expected to occur within 48 hours' and 'Avoid application during temperature inversions.'🔗 Source
When mixing Miravis Ace alone in a spray or mixing tank, what is the correct sequence for dilution?
- Add the product first, then add all the water and agitate.
- Add all the water, add the product, and agitate.
- Add 1/2 to 2/3 of the required water, add the product, continue agitation, then add the remaining water.
- Add 1/2 of the water, add the product, stop agitation, then add the remaining water.
Show answer
The mixing and dilution notes state: 'When mixing alone, add 1/2 to 2/3 of the required amount of water to the spray or mixing tank, then add Miravis Ace, continue agitation, then add the remaining water.'🔗 Source
Where is Miravis Ace specifically designed for use?
- Vegetable crops
- Cereal grains
- Fruit trees
- Turfgrass
Show answer
The product description states: 'This product is designed for use on cereal grains to manage various important plant diseases.'🔗 Source
← All practice exams