Start practice — 8 questions →
Sample questions
According to the label, which of the following is a restriction regarding aquatic bodies?
- Do not apply within 25 yards of any lake or river
- Do not apply within 20 yards of any lake, river, or marsh
- Do not apply to any permanent stream or reservoir
- Do not apply if the area is within 50 feet of a commercial fish farm pond
Show answer
Do not apply to aquatic bodies (lakes, reservoirs, rivers, permanent streams, marshes, estuaries, natural ponds, or commercial fish farm ponds) within 20 yards🔗 Source
Which respirator type is required for applicators using Force 10G HL?
- Any N95 mask
- A NIOSH-approved particulate filtering facepiece respirator with R or P filter
- A full-face vapor respirator
- An organic vapor cartridge respirator
Show answer
Applicators must wear... a NIOSH-approved particulate filtering facepiece respirator with R or P filter🔗 Source
What is the minimum distance required between the field edge and a downwind gradient aquatic habitat, unless specific exceptions apply?
- 10 yards
- 20 yards
- 25 feet
- 50 feet
Show answer
Maintain a vegetative filter strip of at least 25 feet between the field edge and downwind gradient aquatic habitat, unless specific exceptions apply🔗 Source
What is the required plant-back restriction for all crops after applying Force 10G HL?
- 24 hours
- 48 hours
- 30 days
- 60 days
Show answer
Rotational crop (plant-back) restriction is 30 days for all crops🔗 Source
In NO-TILL corn acreage that drains to neighboring aquatic sites, what is the required application method?
- Band application
- T-band application
- In-furrow treatment only
- Surface broadcast only
Show answer
For NO-TILL corn acreage that drains to adjacent or neighboring aquatic sites, apply as an in-furrow treatment only🔗 Source
When applying Force 10G HL as a band or T-band treatment, what requirement must be met?
- The product must be applied at least 25 feet from any water source
- The product must be applied only during the vegetative state of the crop
- The product must be incorporated into the top one inch of soil using suitable equipment
- The product must be applied as an in-furrow treatment only
Show answer
Do not apply as a band or T-band treatment unless the product can be incorporated into the top one inch of soil using tires, press wheels, closing wheels, chains, or other suitable equipment🔗 Source
What is the required re-entry interval (REI) for this product?
- 24 hours
- 48 hours
- 12 hours
- 72 hours
Show answer
REI: 48 hours🔗 Source
Which type of gloves are acceptable for use when applying Force 10G HL?
- Any standard cotton or fabric gloves
- Barrier laminate, butyl rubber ≥ 14 mils, nitrile rubber ≥ 14 mils, or Viton ≥ 14 mils
- Lightweight latex gloves
- Leather work gloves
Show answer
Applicators must wear... chemical-resistant gloves (barrier laminate, butyl rubber ≥ 14 mils, nitrile rubber ≥ 14 mils, or Viton ≥ 14 mils)🔗 Source
← All practice exams