Start practice — 24 questions →
Sample questions (showing 8 of 24)
What should a technician do if the gel contacts an exposed surface?
- Remove gel and wash exposed surfaces
- Leave it to dry naturally
- Cover it with a repellent insecticide
- Apply more gel over the area
Show answer
The label instructs: 'If gel contacts an exposed surface, remove gel, and wash exposed surfaces.'🔗 Source
When applying to mosquito breeding sites, what is the correct rate and dilution?
- 1.0 fl. oz. at 0.050% dilution
- 0.5 fl. oz. at 0.025% dilution
- 0.1 fl. oz. at 0.005% dilution
- 0.5 fl. oz. at 0.050% dilution
Show answer
The label specifies 0.5 fl. oz. at 0.025% dilution for mosquito breeding sites.🔗 Source
Under what condition should applications be performed when only maintenance staff are present and the building is otherwise unoccupied?
- Unless it is an emergency situation
- Always
- Only for outdoor power spraying
- Only when treating drains
Show answer
The timing/weather section states that unless it is an emergency, applications should be performed when only maintenance staff are present and the building is unoccupied.🔗 Source
According to the label, where is the only permitted location for killing Swarming Termites?
- Indoors only
- Outdoors only
- Both indoors and outdoors
- Only in ornamental trees
Show answer
The restrictions section explicitly states: 'To kill Swarming Termites: OUTDOORS ONLY.'🔗 Source
For residential and commercial trees and shrubs, what is a primary restriction on use?
- They must not be harvested for food
- They must be at least 5 feet from a structure
- They must be treated only in the spring
- They must be treated with a 0.050% dilution
Show answer
The restrictions state the product is for trees, shrubs, etc., 'that will not be harvested for food.'🔗 Source
When performing a ULV fog or space spray application, when may re-entry occur?
- After the treated area has been thoroughly ventilated.
- Once the spray has dried.
- After 24 hours have passed.
- Immediately after application is complete.
Show answer
For ULV fog or space spray applications, re-entry may occur after the treated area has been thoroughly ventilated.🔗 Source
When treating listed stinging insects, what is the recommended timing for application to nests and harborage areas?
- Late in the evening when stinging insects are commonly at rest
- Early in the morning when insects are most active
- During the heat of the day to ensure rapid drying
- Only during the spring swarming season
Show answer
The label states to apply spray solution to nests and harborage areas late in the evening when stinging insects are commonly at rest.🔗 Source
Regarding textiles and clothing, what is a noted precaution for using the bait?
- Avoid contact as bait may stain
- It is safe to use on all fabrics
- It helps repel insects from clothing
- It must be applied to clothing to be effective
Show answer
The label states to avoid contact with textiles and clothing as the bait may stain.🔗 Source
← All practice exams