Start practice — 8 questions →
Sample questions
During spray preparation, what is the required method for ensuring the insecticide is fully dispersed in the tank?
- Air agitation only.
- Mechanical or hydraulic means.
- Manual stirring only.
- High-pressure air injection.
Show answer
Use mechanical or hydraulic means; do not use air agitation.🔗 Source
According to the label, what must be done once the insecticide is dispersed in the spray tank?
- Stop agitation to prevent foaming.
- Add all additives immediately.
- Continue agitation.
- Increase air agitation.
Show answer
Mix thoroughly to fully disperse the insecticide, once dispersed continued agitation is required.🔗 Source
When mixing at-plant applications with fertilizer, when should micronutrients or soil amendments be added?
- Before the liquid fertilizer is added to the tank.
- At the same time as the ELEVEST® insect control.
- After the ELEVEST® insect control is thoroughly mixed with the carrier.
- After the entire tank is filled and agitated.
Show answer
Add any other additives (micronutrients, soil amendments, etc.) to the tank after the ELEVEST® insect control is thoroughly mixed with the carrier.🔗 Source
Under what condition is mixing ELEVEST® insect control with another product prohibited?
- If the other product contains a label prohibition against such mixing.
- If the other product is a liquid fertilizer.
- If the other product is a soil amendment.
- If the other product requires air agitation.
Show answer
This product cannot be mixed with any product containing a label prohibition against such mixing.🔗 Source
What is the requirement for Personal Protective Equipment (PPE) when using this product?
- Use the PPE specified on the ELEVEST® label only.
- Use the most restrictive PPE of the products to be tested.
- Standard chemical-resistant gloves and goggles.
- PPE is not required for this product.
Show answer
PPE: Using the most restrictive PPE of the products to be tested🔗 Source
When performing at-plant applications with fertilizer, in what order should the ingredients be added to the tank?
- Add fertilizer, then ELEVEST® insect control, then remaining fertilizer or water, followed by additives.
- Add water, then ELEVEST® insect control, then fertilizer, then additives.
- Add ELEVEST® insect control, then water, then fertilizer, then additives.
- Add additives, then fertilizer, then ELEVEST® insect control, then water.
Show answer
At-plant Applications with Fertilizer: Fill the tank 1/3 to ½ full with liquid fertilizer or water and begin spray tank agitation. Add the proper amount of ELEVEST® insect control, and then add the rest of the fertilizer or water. Add any other additives (micronutrients, soil amendments, etc.) to the tank after the ELEVEST® insect control is thoroughly mixed with the carrier.🔗 Source
What restriction is placed on the application of this product regarding dosage?
- Do not exceed labeled dosage rates.
- Only apply at half the labeled dosage rate.
- Apply at twice the labeled dosage rate for at-plant applications.
- Dosage rates must be adjusted based on air agitation.
Show answer
Do not exceed labeled dosage rates.🔗 Source
When mixing ELEVEST® insect control with water for spray preparation, how much water should be used to fill the tank initially?
- 1/3 to 1/2 full
- 1/2 to 3/4 full
- 1/4 to 1/2 full
- Full tank capacity
Show answer
Spray Preparation: Fill spray tank 1/4 to 1/2 full of water.🔗 Source
← All practice exams