Start practice — 8 questions →
Sample questions
According to the label, what is the target pest for Dominion 2L Termiticide?
- Termites
- Ants
- Cockroaches
- Fleas
Show answer
The label facts explicitly list termites as the target pest.🔗 Source
For 'In-Line Injection' to achieve a 0.1% finished strength, what is the required amount?
- 0.6 fl oz/gal
- 0.3 fl oz/gal
- 1.5 gallons per 10 sq ft
- 4 gallons per 10 linear feet
Show answer
The label specifies 0.6 fl oz/gal for In-Line Injection at a 0.1% finished strength.🔗 Source
Which of the following is a stated restriction regarding the application of this product prior to the installation of finished grade?
- Do not apply at a lower dosage and/or concentration than specified on the label
- Do not apply during rainfall
- Do not apply in basements
- Do not apply in areas with gravel fill
Show answer
The label restricts applying at a lower dosage or concentration than specified for application prior to installation of finished grade.🔗 Source
What is the required application rate for 'critical areas' (such as along the inside of foundation walls or around plumbing) per 10 linear feet?
- 4 gallons of solution
- 1 gallon of solution
- 1.5 gallons of solution
- 0.1% finished strength
Show answer
For critical areas, the label specifies a rate of 4 gallons of solution per 10 linear feet.🔗 Source
When applying to a concrete slab-on-ground where the fill under the slab is gravel or other coarse aggregate, what is the required application rate?
- 1.5 gallons of solution to cover 10 square feet
- 1 gallon of solution to cover 10 square feet
- 4 gallons of solution per 10 linear feet
- 0.6 fl oz per gallon of water
Show answer
The label states that if fill under slab is gravel or coarse aggregate, apply at the rate of 1.5 gallons to cover 10 square feet.🔗 Source
When using the 55 fl oz size to create a 0.1% finished strength solution, how much product should be mixed per 1 gallon of water?
- 0.6 fl oz
- 0.3 fl oz
- 13.8 fl oz
- 16 mL
Show answer
For the 55 fl oz size, the label specifies 0.6 fl oz per 1 gallon of water for a 0.1% finished strength.🔗 Source
Regarding contaminated areas of a structure, what does the label instruct?
- Do not allow people or pets to contact or reoccupy contaminated areas until cleanup is completed
- Do not allow pets to enter the area for 24 hours
- Only allow adults to reoccupy the area
- Apply a second dose before reoccupancy
Show answer
The label states not to allow people or pets to contact or reoccupy contaminated areas until cleanup is completed.🔗 Source
When using the 240 mL size to create a 0.05% finished strength solution, how much product is required for 1 gallon of water?
Show answer
For the 240 mL size, the label specifies 8 mL per 1 gallon of water for a 0.05% finished strength.🔗 Source
← All practice exams