Start practice — 8 questions →
Sample questions
What is the required action regarding people or pets in relation to treated surfaces?
- They may contact surfaces once the spray is damp.
- They must stay away until the product has dried.
- They must wear PPE when walking on treated floors.
- They should only enter after 24 hours have passed.
Show answer
Always ensure the product has dried before allowing people or pets to contact treated surfaces.🔗 Source
When treating a severe pest infestation, what is the required amount of Barricor SP per fluid ounce of finished product?
- 0.125 fl oz
- 0.25 fl oz
- 0.75 fl oz
- 1.5 fl oz
Show answer
For severe pest infestation or hard to kill pests, use 1.5 fl oz product to achieve a finished strength of 0.03% Deltamethrin.🔗 Source
Regarding skin contact, what is a noted potential risk for some individuals?
- Immediate chemical burns
- Allergic reactions from prolonged or frequent contact
- Temporary skin staining
- Systemic toxicity through skin absorption
Show answer
Prolonged or frequently repeated skin contact may cause allergic reactions in some individuals.🔗 Source
To ensure the pesticide does not wash or spread off the treated area, in what weather condition should you avoid application?
- During high wind conditions only
- When rain is expected within 24 hours
- During periods of high humidity
- When temperatures exceed 90 degrees
Show answer
Do not apply in climates where rain is expected within 24 hours to ensure wind or rain does not wash or spread the pesticide off the treated area.🔗 Source
A technician is performing an initial service or a clean out treatment. How much product should be used per fluid ounce of finished product?
- 1.5 fl oz
- 0.25 fl oz
- 0.75 fl oz
Show answer
For Initial service, clean out treatment, or the below pests, use 0.75 fl oz product for a finished strength of 0.015% Deltamethrin.🔗 Source
In which of the following locations is the use of water-based sprays of Barricor SP prohibited due to shock hazards?
- Crack and crevice applications in kitchens
- Around window and door frames
- Motor housings, junction boxes, or switch boxes
- On fabrics and plastics
Show answer
Do not use water-based sprays of Barricor SP in motor housings, junction boxes, switch boxes, or other electrical equipment because of possible shock hazard.🔗 Source
According to the label, which of the following is a prohibited application site?
- Livestock housing
- Commercial and industrial buildings
- Surfaces in food handling establishments that contact food
- Residential walls and ceilings
Show answer
Do not apply to surfaces in food handling establishments that come into contact with food.🔗 Source
Which type of application method is NOT listed for Barricor SP?
- Spot treatments
- Crack and crevice applications
- Broadcast sprays
- Aerial dispersal
Show answer
The product is versatile, allowing for spot treatments, crack and crevice applications, or broadcast sprays.🔗 Source
← All practice exams