Start practice — 8 questions →
Sample questions
Under which weather condition is it prohibited to apply Axxe?
- If rain is expected within 2 hours of application
- If temperatures are between 70°F and 80°F
- If there is light humidity in the air
- If the application occurs during the early morning
Show answer
The label explicitly states: 'Do not apply if rain is expected within 2 hours of application.'🔗 Source
When applying Axxe, what should a technician do to ensure the best results?
- Ensure thorough coverage of plant foliage
- Apply only to the soil around the base of the plant
- Apply only during high wind conditions to increase spread
- Mix with oil to increase systemic movement
Show answer
The label states: 'For best results, ensure thorough coverage of plant foliage.'🔗 Source
What is the required finished strength range for Axxe when diluted for general weed control?
- 6% to 32.5% VV
- 40% to 82% VV
- 2% to 10% VV
- 15% to 40% VV
Show answer
The mixing section specifies a finished strength of 6% to 32.5% VV.🔗 Source
Which set of Personal Protective Equipment (PPE) is required when using Axxe?
- Long-sleeved shirts, long pants, chemical-resistant gloves, and protective eyewear
- Short-sleeved shirts, shorts, and rubber boots
- Full-body Tyvek suit and a respirator
- Chemical-resistant gloves and a face shield only
Show answer
The PPE section requires long-sleeved shirts, long pants, chemical-resistant gloves, and protective eyewear.🔗 Source
What is the re-entry interval (REI) for Axxe?
- 4 hours
- 12 hours
- 24 hours
- 48 hours
Show answer
The label specifies a re-entry interval (rei_hours) of 4.🔗 Source
What is the maximum temperature allowed for an Axxe application?
Show answer
The label states do not apply if temperatures exceed 82°F.🔗 Source
Which of the following best describes the action and selectivity of Axxe?
- A contact, non-selective herbicide that kills any plant material it touches
- A systemic, selective herbicide that only targets broadleaf weeds
- A contact herbicide that only kills annual weeds and leaves perennials intact
- A systemic, non-selective herbicide that travels through the plant roots
Show answer
The label states Axxe is a contact, non-selective herbicide that will damage or kill any plant material it contacts.🔗 Source
According to the label, which of these is a permitted site for Axxe application?
- Walkways and gravel areas
- Only inside residential greenhouses
- Only in agricultural corn and soy fields
- Only on non-vegetated industrial surfaces
Show answer
The label lists walkways and gravel areas as examples of industrial/residential sites where the product can be applied.🔗 Source
← All practice exams