Start practice — 8 questions →
Sample questions
Which application method is recommended for treating pests in difficult to reach areas such as wall or structural voids?
- High-volume power-spray equipment
- Foam applications
- Backpack or hand sprayers
- ULV equipment like a Micro Injector
Show answer
The label specifies foam applications for voids, such as wall or other structural voids, to treat pests in difficult to reach areas.🔗 Source
When applying Advion WDG to interior or exterior surfaces, what is the maximum application rate allowed?
- No more than 1 gallon per 1,000 sq ft
- 1-4 gallons per 1,000 sq ft
- Exactly 4 gallons per 1,000 sq ft
- 0.1% dilution per 1,000 sq ft
Show answer
The label states for interior or exterior surfaces, the rate is no more than 1 gallon per 1,000 sq ft.🔗 Source
Which piece of equipment is specifically mentioned for crack-and-crevice or spot applications?
- High-volume power-spray equipment
- ULV equipment such as a Micro Injector or Actisol machine
- Irrigation systems
- Backpack sprayers
Show answer
The label states crack-and-crevice or spot applications can be applied using ULV equipment such as a Micro Injector or Actisol machine.🔗 Source
To achieve a 0.10% finished strength in a non-refillable rigid plastic container using 5 gallons of water, how much product should be used?
- 0.33 oz
- 1.7 oz
- 3.3 oz
- 16.5 oz
Show answer
The mixing table indicates 3.3 oz of product per 5 gallons of water results in a 0.10% finished strength.🔗 Source
According to the restrictions, which of the following is a prohibited use for Advion WDG?
- Applying to exterior landscaping
- Using with a backpack sprayer
- Applying through any type of irrigation system (chemigation)
- Crack-and-crevice applications
Show answer
The restrictions explicitly state: 'Chemigation: DO NOT apply this product through any type of irrigation system.'🔗 Source
Advion WDG is NOT permitted for use on which of the following?
- Dense perimeter landscaping
- Plants being grown for sale or other commercial use
- Porous surfaces
- Exterior of structures
Show answer
The label states: 'Not for use on plants being grown for sale or other commercial use, or for commercial seed production.'🔗 Source
When using high-volume power-spray equipment on the exterior of structures for medium to heavy infestations, what is the required dilution?
- 0.1%
- 0.05%
- Less than 0.05%
- 0.33%
Show answer
For high-volume power-spray equipment on the exterior of structures, the dilution should be less than 0.05%.🔗 Source
If a technician is preparing a foam application, what is the required amount of product per 1 gallon of water to achieve a 0.05-0.1% strength?
- 0.33 oz to 0.66 oz
- 1.0 oz to 2.0 oz
- 0.1 oz to 0.5 oz
- 3.3 oz to 8.25 oz
Show answer
For foam preparation, the mixing instructions specify 0.33 oz to 0.66 oz per 1 gallon of water for a 0.05-0.1% strength.🔗 Source
← All practice exams